Small business start up. Need to set up office, bring all computers on line, discuss applicability of a server to share and protect information. Tight budgets--
<toomas_niemann@yahoo.com>
ClinicalClean
208 South Fehr Way:
Bay Shore NY 11706

Phone: 631 4635261

Fax: 631 5845577
- Tuesday, January 06, 2009 at 07:27:46 (MST)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Stan Buoninfante
Company: Mod A Can, Inc.
Address: 178 Millter Place
City, St, Zip: Hicksville NY
Phone: 516-931-7700 Fax:
E-mail: stan@modacan.com
Source of lead: Make Selection
Description of Project:
Needs occasional electrical / electronic help with various projects. He is presently focussed on a spares order relagted to the F-16. His web site is http://www.modacan.com
- Tuesday, December 02, 2008 at 15:22:52 (MST)

From: Stu Senator <s.senator@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: Stu Senator and E-mail: s.senator@ieee.org
Information on Prospect:
Name: Ryan McGans
Company: Solar Cool
Address:
City, St, Zip:
Phone: 631 678 6231 Fax:
E-mail:
Source of lead: Ad in LIBN or Newsday
Description of Project:
As he said on phone message he needs an EE to design a circuit bd for a temp control. It will have a display and ribbon cable interface. He will send a copy of the required spec to you if you call him. The project is company confid. Stu
- Monday, November 24, 2008 at 12:07:09 (MST)

From: Stu Senator <s.senator@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: Stu Senator and E-mail: s.senator@ieee.org
Information on Prospect:
Name: Ryan Feldman
Company: Lost & Found LLC
Address:
City, St, Zip:
Phone: 516 319 8474 Fax:
E-mail:
Source of lead: Word of mouth
Description of Project:
Redesign of an RFID tag to be smaller. Product is currently undergoing user testing but is thought to be to large. Company is a start up and they have other products in the pipeline. Ryan is trying to get a handle on future development costs. I stated that without knowledge of the product and state of the idea this was not very feasible. The lead is from a distributor via word of mouth.
- Friday, November 07, 2008 at 13:56:03 (MST)

From: JOHN LIGUORI <LIGUORI1@OPTONLINE.NET>
Subject: LICN: Volunteer Report
Volunteer Name: JOHN LIGUORI and E-mail: LIGUORI1@OPTONLINE.NET
Information on Prospect:
Name: HARRY MALIGA
Company: JH MALIGA ENGINEERING
Address: 4014 8TH AVENUE
City, St, Zip: BROOKLYN NY
Phone: 800-222-5352 Fax: 718-972-6291
E-mail: NONE
Source of lead: LICN Postcard
Description of Project:
Type of Product Power Supply / Oscillator for ultrasonic dental cleaning instrument 120 VAC, .65 to .85 Amps, converted to 24VDC which then drives a tunable oscillator circuit at 22 to 30 khz which drives an ultrasonic cleaning instrument. Must match output frequency to resonant frequency of the tool and want it to be automatiucally tunable. Power supply to drive drill as well as ultrasonic oscillator via selector switch. Dental cleaning instrument retail price is $125 – $700 Desire to do the following: Eliminate drifting of unijunction of transistor Improve biasing of magneto probe Simplify oscillator design
- Thursday, October 23, 2008 at 08:23:23 (MST)

Opportunity to join in the creation of a personalized interactive children's book delivery system. Patent process is underway. Independent inventor has contacts at the highest levels with some of the world's greatest children's book and toy companies making distribution likely. Meetings have been held resulting in positive feedback and the need to create a prototype. Applicant should have demonstrable experience in some or all of the following areas: highly skilled with pc interfacing (USB, Bluetooth), optics, ccd, OCR, and creating mock up models with electrical layouts. Facility with software creation both for chips and the web (e.g., Java) a huge plus. Fee/profit percentage negotiable. Please send resume and reason why you want to work on a speculative project with a startup company such as this.
<schosed@nyc.rr.com>
Terra Lindos LLC
30 Waterside Plaza:
New York NY 10010

Phone: 917 553 0122

- Tuesday, July 22, 2008 at 13:43:29 (MST)

RF design for low power wireless temperature sensor and receiver.
<ahusson@hughes.net>
US Energy Controls
78-40 164th Street:
Flushing NY 16633

Phone: 207-948-3488

- Monday, July 14, 2008 at 03:41:31 (MST)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Paul Alesandrini
Company: Fil-Coil / Custom Power Systems
Address:
City, St, Zip:
Phone: 631-582-2080 Fax:
E-mail: sales@custompowersystem.com
Source of lead: Make Selection
Description of Project:
I made a great many phone calls to reach him, but without success. I called the main company number for his e-mail address, sent that out and still no reply.
- Saturday, June 28, 2008 at 13:50:54 (MST)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Azizi Bilal
Company:
Address:
City, St, Zip:
Phone: 516-385-1631 Fax:
E-mail: azibil@netscape.net
Source of lead: Make Selection
Description of Project:
Asked for help with drawings for a patent application, but when I called, he seemed not to remember that he'd stated that as his requirement.
- Saturday, June 28, 2008 at 13:47:14 (MST)

From: Jerry Brown <jlbrown@essexsys.com>
Subject: LICN: Volunteer Report
Volunteer Name: Jerry Brown and E-mail: jlbrown@essexsys.com
Information on Prospect:
Name: Jerry Brown
Company: Essex Systems
Address: 36 Flower Hill Rd
City, St, Zip: Huntington NY
Phone: Fax:
E-mail: jlbrown1@optonline.net
Source of lead: Make Selection
Description of Project:
This is a test.
- Monday, June 16, 2008 at 13:45:31 (MST)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Lorris Skeete
Company:
Address:
City, St, Zip:
Phone: 516-425-9139 Fax:
E-mail:
Source of lead: Make Selection
Description of Project:
Mr. Skeete has a home in Freeport which he has just sold, but for which permits were never obtained for a portico on the front and a cantilever extension on the back. Money is being held in escrow pending his obtaining the needed permits. To that end, he needs someone to prepare architectural drawings of those two items.
- Thursday, June 05, 2008 at 14:14:18 (MST)

Looking for a design consultant to build a DC to DC step step-up circuit. Must have DC-DC step-up power supply expertise.
<mbryant@air802.com>
AIR802 LLC
931 W. 75th St:
Naperville IL 60565

Phone: 6304283108

- Wednesday, May 07, 2008 at 10:14:39 (CDT)

work with a company on desiging the software for a new platform
<talk2@optonline.net>
YB Green
134 Sunken Meadow Rd:
fort salonga NY 11768

Phone: 631 702 5668

- Tuesday, February 26, 2008 at 18:22:00 (CST)

Engineers and Technical Specialists Needed!!! East Point is the alternative to contract manufacturing and outsourcing in Asia that transfers manufacturing, services, and development to Asia. East Point is in need of specialists with knowledge in specific industries to research specific markets and products. Engineers and Technical Specialists needed in the following industries: Medical Scientific Telecommunications Pharmaceutical Alternative Energy Aerospace and Defense Fiber Optics Consumer Products Life Sciences High Technology Electronics Automotive and Transportation Software and Systems Development Machinery and Industrial Construction Equipment and heavy machinery Device manufacturing Cosmetics Horticultural Textile Pharmaceutical
<craig@ep-ms.com>
East Point Solutions
380 Townline Rd:
Hauppauge ny 11788

Phone: 5162057786

Fax: 5169084667
- Friday, January 04, 2008 at 09:40:43 (CST)

Customer wants to purchase an auto repair shop along with the client List in Suffolk County, Long Island, NY
<msreal@optonline.net>
Remax Signature
95 E Main Street:
Babylon NY 11702

Phone: 917 545 8944

Fax: 631 422 7437
- Thursday, November 15, 2007 at 15:35:51 (CST)

Low power analog ASIC designer, amplifier design We are looking for a skilled low power analog ASIC designer for an exciting project in the Copenhagen area. Would you be available? And interested? And qualified? Or would you know someone I can contact? The USD is low and the EURO is high right now, so why not take advantage of that and do some work paid in EURO? Application/field: * Low power CMOS opamps for measurements system * Low speed optical input/sensor Skills required: * Low Power Analog ASIC design experience (uA to few mA). * Amplifier design experience (low-power op-amps etc.) Skills preferred: * Experience with Cadence tools (Virtuoso, Spectre, XL Layout) preferred * Knowledge of Assura preferred * Technology .18, knowledge preferred Start: ASAP / Before Christmas Period: 3-6 month Location: Greater Copenhagen/Denmark area. This assignment is full time on site. Rate: Up to USD 125/h all inclusive. We can help getting required visas etc. as well as finding adequate accommodation.
<ro@axcon.dk>
Axcon
Diplomvej 265:
Lyngby CA 2800

Phone: +45 4822 9266

- Friday, October 05, 2007 at 01:51:16 (CDT)

This is a third-party requirement that I am passing along to the group. The prospect is a wireless communications system integrator executing a large contract for the installation of a network comprised of numerous sites, covering a wide geographical area. They are seeking an appropriately-experienced individual to assist in managing the project. My assessment is that execution will take several years. Anyone with the skills, experience, and interest please contact me for more information. -LR
<larryr@4innovation.biz>
Innovation Design and Solutions
1044 Washington Drive:
Centerporrt NY 11721

Phone: 631-427-1112

- Thursday, September 13, 2007 at 06:06:36 (CDT)

Design of instant restrike 1000w HID lamp power supply/ballast.
<jparis@technologist.com>
scj enterprises, inc.
3 riviera drive east:
massapequa ny 11758

Phone: 516-797-8903

Fax: 516-797-8906
- Wednesday, August 08, 2007 at 20:21:52 (CDT)

Electrical Engineer needed for a 3-5 month offsite assignment. My client anticipates that this project will be a full time (40 hour per week) effort. Candidate MUST have their own lab/workstation & will be flown in as needed (this should be minimal) Must be experienced with board layout and with the overall layout of hardware and boards. Candidate will be tasked with the miniaturization and packaging of a new, prototype circuit hardware. Must have DC-DC step-up power supply expertise. Prior experience with high-voltage, low-current circuits is a STRONG plus. Ideal candidate will have experience in the design and building of power supplies. Must have ability in lab to test out circuits and to grab/capture oscilloscope plots If interested please reply with a word version of your resume. If you are not available / interested PLEASE forward this email to any engineers that you know. Also if you would like to work with me in the future, please forward an updated resume with a note detailing when
<marc@ariesgroupinc.com>
Aries Group Inc
100 Cummings Center:
Beverly ma 01915

Phone: 877-806-7977 273

- Friday, June 08, 2007 at 15:57:29 (CDT)

We have a need for an engineering consultant who has experience developing USB 2.0 with CYPRESS devices and Spartan programming. If you would be interested in the project and learning more, please email me. Thank you , Vlad. vgugelev@meridian-tech.com
<vgugelev@meridian-tech.com>
Meridian Technologies Inc.
700 Elmont Road:
Elmont NY 11003

Phone: 516 285 1000

Fax: 516 286 6300
- Friday, May 25, 2007 at 09:42:53 (CDT)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Hugh Gigante
Company: Device Partners International
Address:
City, St, Zip:
Phone: 516-241-7477 Fax:
E-mail: hgigante@optonline.net
Source of lead: LICN Web Site
Description of Project:
Needs to make medical devices ready for offshore manufacture. Devices are watch-sized and serve as pain reducers. Non-disclosure agreement will be required.
- Saturday, May 12, 2007 at 15:34:16 (CDT)

This is another test. Note that you have to answer a trivial question for this to work now. ... answer kitten .... I'll correct things so an error doesn't come up if you don't answer ... but nothing will be sent to the membership unless you do answer.
<jlatourr@optonline.net>
Consultant
2 Candlewood Ct:
Huntington NY 11743

Phone: 631-271-6763

Fax: 631-424-6962
- Thursday, May 10, 2007 at 08:51:34 (CDT)

This is a test of a small captcha, to see if we can block robots.
<jlatourr@optonline.net>
Consultant
2 Candlewood Ct:
Huntington NY 11743

Phone: 271-6763

- Saturday, April 28, 2007 at 13:30:45 (CDT)

My computer system crashed last week. I recovered my software, but need to get the latest data from the Documents and Settings folder. My computer says the hard disk needs to be formatted. I haven't done any formatting, but I need to recover the data in that folder. Leslie M. Orloff l.orloff@ieee.org
<l.orloff@ieee.org>
ACTIVE SYSTEMS DEVELOPMENT LAB
6 ROUGH RIDERS COURT:
COLD SPRING HARBOR NY 11724

Phone: 631-692-6329

Fax: 631-692-8749
- Friday, April 27, 2007 at 14:01:55 (CDT)

Cool site.
<kk.skraus7072@real-cheap-email.com>
None
198 Tremont Street:
Boston MA 02116

Phone: 781-658-2687

Fax: 781-658-2687
- Sunday, March 18, 2007 at 23:53:43 (CST)

Hello We need a help for USB 2.0 Cypress CY768013A and FPGA Spartan 3e design. Best regards. Vladimir Gugelev Sr. engineer
<vgugelev@meridian-tech.com>
Meridian Technologies Inc.
700 Elmont Road:
Elmont NY 11003

Phone: 1 516 285 1000

Fax: 1 516 285 6300
- Wednesday, January 31, 2007 at 13:58:41 (CST)

Cool site.
<big_Dobson2363@your-pop3.com>
None
198 Tremont Street :
Boston MA 02116

Phone: 617-830-0852

Fax: 617-830-0852
- Monday, January 29, 2007 at 00:55:50 (CST)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Jack Walters
Company:
Address:
City, St, Zip:
Phone: 516-520-5810 Fax:
E-mail:
Source of lead: Make Selection
Description of Project:
Video streaming project involving no delay and no buffering. The technology behind this is new and proprietary, but he needs someone to help him work on it.
- Wednesday, January 03, 2007 at 07:20:20 (CST)

From: John Dunn <ambertec@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: John Dunn and E-mail: ambertec@ieee.org
Information on Prospect:
Name: Shodhan Shetty
Company: Ellman International
Address: 3333 Royal Ave
City, St, Zip: Oceanside NY
Phone: 516-267-6752 Fax:
E-mail: shodhan@ellman.com
Source of lead: Make Selection
Description of Project:
He is experiencing RF transistor failures in a class-A, 4 MHz power amplifier that is delivering a carrier power of 55 MHz at zero modulation and which modulates downward only to maximum of 100% AM. He needs redesign to eliminate the failures.
- Tuesday, December 12, 2006 at 08:25:52 (CST)

Project Description: Some of our Analog circuit designed devices (or High RF energy devices) have to be redesigned to remove the occurrence of some of the Breakdown Problems currently seen with our international customers. THe list of Breakdown problems and a more formal Project Definition would be provided when contacted formally. We need a consultant who is very good and experienced in Analog circuit design, specifically transistors and Regulators, with experience on the cause of failures of these components, and other associated issues related to Analog design. THey should also have experience with the electrical systems available internationally in different countries across the world (Specifically Japan). Please respond asap/immediately, as we consider this an urgent requirement for these devices.
<shodhan@ellman.com>
Ellman International
3333 Royal Ave:
Oceanside NY 11572

Phone: 5162676752

- Monday, December 11, 2006 at 08:24:28 (CST)

None.
<bbc_Dobson4726@pop-hosting.com>
None
198 Tremont Street, 506:
Boston MA 02116

Phone: 617-830-0852

Fax: 617-830-0852
- Sunday, December 10, 2006 at 23:40:41 (CST)

Evaluate and certify in-house built (home made) equipment operating over 50 Volts to ensure basic code and / or consensus standard compliance.
<anne.thomas@l-3com.com>
L3 Communications Narda East
435 Moreland Road:
Hauppauge NY 11788

Phone: 631-231-1700 x283

- Thursday, November 30, 2006 at 06:54:28 (CST)

My home has what I believe to be infrasound vibrations. I can no longer sleep there, because of vibrations of the ear. I have headaches when I am home, feel nauseous, feel a pounding in chest, and slight vibrations. I hope and pray you can measure the hz and determine the source. I am a school teacher and it took many years to afford my own home. I really can't afford to move.. Please help! Thank you, Dee Vito Home# 203 264-7860 Cell # 203 577-7081
<deevito@peoplepc.com>
private resident
48 Branch Road:
Southbury CT 06488

Phone: 203 577-7081

- Friday, November 10, 2006 at 20:26:54 (CST)

I liked your site.
<bpb.Dobson5746@spatzer.com>
None
198 Tremont Street, 506:
Boston MA 02116

Phone: 617-830-0852

Fax: 617-830-0852
- Wednesday, October 25, 2006 at 03:30:34 (CDT)

We are looking for an engineer who understands and has experience builing computer storage and memory systems from the board level up for a startup company. Please send resumes and a letter of intro. Thank you. Howard Solomon
<hs@integrityds.net>
Integrity Data Systems, Inc.
2 Fanwood Place:
South Huntington NY 11746

Phone: 631.479.2401

- Tuesday, October 24, 2006 at 19:37:49 (CDT)

I am interested in opening a retail store in Merrick-Bellmore area. Please let me know if you provide consultation services in that area. Thanks.
<julievelocci@yahoo.com>
N/A
1743 DeSalle Place:
Merrick NY 11566

Phone: 917-453-6822

- Tuesday, October 17, 2006 at 14:44:36 (CDT)

From: Larry Rachman <larryr@4innovation.biz>
Subject: LICN: Volunteer Report
Volunteer Name: Larry Rachman and E-mail: larryr@4innovation.biz
Information on Prospect:
Name: Andrew Goh
Company: Virtual TruTrends
Address: n/a
City, St, Zip: n/a
Phone: 516-487-8787 Fax:
E-mail: chiengoh@genadyne.com
Source of lead: Make Selection
Description of Project:
(More details on the message he posted directly, following our telecon) Virtual Trutrends is a subsidiary of Genadyne. The project is an interface that permits a medical instrument to communicate via the GSM network to a web site that permits interaction with the instrument. Primarily they're looking for someone to create the web site, but there may be an opportunity to participate in the hardware/software interface design as well; per Mr. Goh there is only one engineer working on it right now, and he may need assistance. I'm not sure exactly how far along they are with it at present. Interested parties, please contact Andrew Goh at the above number, or on his cell phone at 516-343-4887 -Larry
- Thursday, September 28, 2006 at 12:23:22 (CDT)

I need a software specialist consultant. Please call me at 1.516.487.8787 or email me at chiengoh@genadyne.com. Thank you.
<chiengoh@genadyne.com>
Virtual TruTrends
65 Watermill Lane:
Great Neck NY 11021

Phone: 15164878787

Fax: 15164877878
- Wednesday, September 27, 2006 at 15:39:14 (CDT)

I am looking for some contractors who could handle small projects. Our main project right now is to create a host application that will be published online over the internet. A little hardware device which will be connecting to the GSM Network and into the internet via the GSM network will transmit data into the IP address published and stored all the information onto a server. Furthermore, the web application can remotely send commands to the little hardware device to control it. I need someone or some small company who could write the web application for us. Can you refer me to someone? Thank you.
<chiengoh@genadyne.com>
Virtual TruTrends
65 Watermill Lane:
Great Neck NY 11021

Phone: 15164878787

Fax: 15164877878
- Wednesday, September 27, 2006 at 15:16:33 (CDT)

From: Jim LaTourrette <jlatourr@optonline.net>
Subject: LICN: Volunteer Report
Volunteer Name: Jim LaTourrette and E-mail: jlatourr@optonline.net
Information on Prospect:
Name: Test to check street address
Company: test-co
Address: 2 Candlewood Ct
City, St, Zip: Huntington NY
Phone: 631-271-6762 Fax: 631-424-6962
E-mail:
Source of lead: LICN Web Site
Description of Project:
Test to see if street address prints
- Monday, September 04, 2006 at 19:23:35 (CDT)

From: Jim LaTourrette <jlatourr@optonline.net>
Subject: LICN: Volunteer Report
Volunteer Name: Jim LaTourrette and E-mail: jlatourr@optonline.net
Information on Prospect:
Name: Erling C. Kristiansen
Company: United Data Systems, Inc.
Address:
City, St, Zip: Huntington NY
Phone: (516) 549-6900 Fax: (516) 549-6977
E-mail: eck@udsystems.com
Source of lead: LICN Web Site
Description of Project:
UDS has a database management system running under SCO Unix that provides comprehensive support for fuel suppliers including customer records, degree day calculations, delivery date projections, billing and payment records, etc. Their DBMS is accessible on a network and supports simultaneous users with appropriate multiuser safeguards. The system has been in use since 1970 and has been frequently upgraded. But it still has a text based user interface. They want to upgrade the system to a "Windows" (GUI) interface but keep all of its functionality and reliability. They state that their DBMS is "C3" which I have not heard about before. They have utilities for exporting all data so that it can be imported into a new DBMS. They prefer to keep the system on UNIX but want a Windows friendly user interface. They asked for recommendations for the best DBMS to use. Kristiansen called me because I live close to his business. I told him I would pass on his request to the LICN. If you are interested, please contact Kristiansen directly, but please cc the info back to me so I will know if anyone has responded.
- Thursday, August 31, 2006 at 13:27:10 (CDT)

From: David Rost <consultdpr@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: David Rost and E-mail: consultdpr@ieee.org
Information on Prospect:
Name: Chris Gallagher
Company:
Address:
City, St, Zip:
Phone: 914 260 4480 Fax:
E-mail:
Source of lead: Make Selection
Description of Project:
He is interested in help on building near the ocean; he thought we were construction consultants. He says he found us in the Yellow Pages (I have not paid for any such listings). I suggested he check with his insurance company for requirements on building on the ocean.
- Wednesday, August 30, 2006 at 15:30:13 (CDT)

From: Jim LaTourrette <jlatourr@optonline.net>
Subject: LICN: Volunteer Report
Volunteer Name: Jim LaTourrette and E-mail: jlatourr@optonline.net
Information on Prospect:
Name: testing
Company: test-co
Address:
City, St, Zip: test-city NY
Phone: 631-271-6762 Fax: 631-424-6962
E-mail: jlatourr@optonline.net
Source of lead: LICN Web Site
Description of Project:
This is just a test to see if the Monthly Volunteer Input Form is being broadcast to the full member mailing list.
- Tuesday, August 08, 2006 at 13:03:32 (CDT)

From: David Rost <consultdpr@ieee.org>
Subject: LICN: Volunteer Report
Volunteer Name: David Rost and E-mail: consultdpr@ieee.org
Information on Prospect:
Name: Mark Sadick
Company: Sag Harbor Industries, Inc
Address:
City, St, Zip: Sag Harbor NY 11963-3706
Phone: 516 967 2970 Fax:
E-mail: mark@sagharborind.com
Source of lead: Word of mouth
Description of Project:
Mark is with Sag Harbor Industries, which is a contract manufacturing house (they don't do design); he would like about 10 directories to hand out to clients who are looking for someone to design a product for them. They can be the existing copies which Peter Buitenkant has; send them to his attention at the above address. Let me know when they are sent, or if there are not 10 copies available - in which case I would ask Jerry Brown (I assume) to get more up to date ones. His customers are OEMs nationwide, but mainly in the Northeast, mostly on LI; they tend to be very budget sensistive. He pitched me aboout having a booth at LISAT next year - says it would cost about $300, including one attendee. I think we should look at this, as we have considerable money in the treasury, and could use some advertising exposure. He will bring a contract to the next meeting for our examination.
- Friday, August 04, 2006 at 10:06:00 (CDT)

My project is a variation of a bicycle odometer.I need a prototype made.I need an engineer (what ever kind that is) that will work on spec. Thank you, Scott Miller
<ansmiller@verizon.net>
shoreham
9 cornell rd.:
shoreham ny 11786

Phone: 631-209-1065

Fax: 631-209-1065
- Friday, July 28, 2006 at 08:02:17 (CDT)

From: Jerry Brown <jlbrown@essexsys.com>
Subject: LICN: Volunteer Report
Volunteer Name: Jerry Brown and E-mail: jlbrown@essexsys.com
Information on Prospect:
Name: Isaac Nectalov
Company: Working as an individual
Address:
City, St, Zip: Forest Hills NY
Phone: 917 687-0410 Fax:
E-mail:
Source of lead: Word of mouth
Description of Project:
This is a non-technical individual (not affiliated with a company) who wants someone to design a circuit and build a prototype. The product is a wireless door chime. Doesn’t think product is patentable. But there must be some novel features, because he wants an NDA. He wants to start right away. He learned about us from a patent attorney named Victor Serby
- Tuesday, July 11, 2006 at 17:35:04 (CDT)

Need circuit design to incorporate a fast ALC circuit for a Broadband Rf amplifier so to have a flatness of less then 0.5 dB across the operating frequency of the amplifier.
<lbenatar@ifi.com>
IFI
903 S. 2nd st.:
Ronkonkoma NY 11779

Phone: 631-4678400x125

Fax: 631-4678558
- Monday, June 26, 2006 at 12:23:31 (CDT)

At Unwired we make IR wireless headphones for use in automotive rear seat entertainment. The IR receiver is a 3 inch PCB which must pass ESD and RFI susceptibility PPAP tests for Ford, GM, DXC etc. The test specs have been raised, and we need a consultant to advise us on techniques to increase performance of the board.
<roy@unwiredtechnology.com>
Unwired Technology
245 Newtown Rd, #200:
Plainview NY 11803

Phone: 516 293 6900

Fax: 516 293 7130
- Tuesday, June 13, 2006 at 13:20:11 (CDT)

A tool much like a bicycle speedometer.
<ansmiller@verizon.net>
Eastwood Inspections
9 Cornell Rd.:
Shoreham NY 11786

Phone: 631-209-1065

Fax: 631-209-1065
- Monday, May 22, 2006 at 13:15:36 (CDT)

Tutorial on preparing a CB report to IEC 60950. Last Fall the IEC voted to let manufacturers issue CB certificates. Mechanism is not yet defined, but we can get started by preparing CB reports. Initial use is to shorten turn-around at agencies,
<david.sterner@honeywell.com>
Honeywell
165 Eileen Way:
Syosset NY 11791

Phone: 516.921.6704x6704

- Thursday, April 27, 2006 at 15:02:06 (CDT)

The product will be a handheld 'noisemaker' for use at sporting events, etc to produce the team cheer, fight song .... The units require wireless communications for synching with other such units and for central control. Other functionality is envisioned down the road. We are going to get going on prototypes shortly. We need help with the wireless and digital design.
<greg@ltbeng.com>
LTB Engineering, PC
907 Stuart Ave:
mamaroneck NY 10543

Phone: 9147771933

- Wednesday, April 12, 2006 at 11:08:19 (CDT)

I'm looking for a PCB designer who can do a good job at a reasonable price on a small (3x5") mixed-mode board with about 120 parts. Does anyone in the network have this capability, or know of someone who does? Thanks, Larry
<larryr@4innovation.biz>
Innovation Design and Sol
POB 336:
Centerport NY 11721

Phone: 6314271112

- Tuesday, December 27, 2005 at 19:55:54 (CST)

From: David Rost <ConsultDPR@IEEE.org>
Subject: LICN: Volunteer Report
Volunteer Name: David Rost and E-mail: ConsultDPR@IEEE.org
Information on Prospect:
Name: Frank Robbins
Company: Next Generation Technology
Address:
City, St, Zip: Port Jefferson Station NY
Phone: 631 928 1600 Fax:
E-mail:
Source of lead: Word of mouth
Description of Project:
They are a radiology house. In Auguast, their phones started randomly hanging up calls; it is a major problem for them, costing them a lot of business (their phone menu even mentions their having major problems with their phones). They have changed their phone system twice, once replacing the Toshiba CTX 100, then replacing it with a NEC Ultra Elite (15 phones); have changed from POTS lines to VOIP with no effect. They have added a lot of shielding, moved the phone system, added a steel shield behind phone system (hard to evaluate from the description how good the shielding might be). Other locations in Great Neck and Garden City don't have the problem. Two cell phone towers within a mile. They are in a stand alone building, brick walls. Problem not as bad at night; still have on Saturday. IT equipment not affected. LAN is cable based; wireless on site but not used much. It would be nice to bring in a spectrun analyzer and antennas and probe around, or bring in an EMI house. This sounds like a good problem for Richard Mohr, who lives not too far away. One weakness of our referral system is that there is no feedback as to whether the customer receives any help. If anyone follows up on this, please let Peter Buitenkant know; I would also appreciate knowing; although I am an hour away, if no one else has an interest, I might be able to help.
- Tuesday, December 13, 2005 at 09:59:19 (CST)

From: Jim LaTourrette <jlatourr@optonline.net>
Subject: LICN: Volunteer Report
Volunteer Name: Jim LaTourrette and E-mail: jlatourr@optonline.net Information on Prospect: Name: James T LaTourrette Company: Consultant Address: 2 Candlewood Ct 67 City, St, Zip: Huntington NY 11743 Phone: 123-456-7890 Fax: 456-789-1234 E-mail: Source of lead: LICN Web Site Description of Project: Second try. I think this will report all the info now, so should be the last test of the new Monthly Volunteer Form
- Friday, December 09, 2005 at 03:47:20 (CST)

From: Jim LaTourrette <jlatourr@optonline.net>
This is just a test of the new form. Hope I won't be sending many of these.
Phone: 631-271-6762
- Friday, December 09, 2005 at 02:25:50 (CST)

Looking for a consultant to assist in writing a proposal for Autonomic Logistics for a military program.
<hlapidus@arkwin.com>
Arkwin Industries
686 Main Street:
Westbury NY 11590

Phone: 516 333-2640 x449

- Friday, November 11, 2005 at 14:50:51 (CST)

SENIOR TEST ENGINEER Our client, an innovative microelectronics hardware design company, is actively seeking a Senior Test Engineer to join their New Product’s Development Team. The company’s mission is to conceive and produce revolutionary, industry leading, cost effective products that will have a significant impact in the marketplace. The role is sure to be challenging and rewarding as you will play a key role in the areas of concept creation, hardware design, prototyping, reliability and production testing, manufacturing process development and commercialization. You must have a strong background in high speed printed circuit board design and component and board level testing. You will be involved in the research and development of the electrical and mechanical design aspects of these new products and the development of reliabi
<jason.turner@magicorp.com>
Magic Corporation
8310 N.Capital of Texas:
Austin TX 78731

Phone: 888-832-4410

Fax: 512-342-7034
- Wednesday, November 09, 2005 at 13:54:51 (CST)

I have an an analog layout position in upstate NY I would like to discuss with you - One year, possibly longer , need is immediate Here's some descriptive info on what I'm looking for in a millimeter wave(60 GHz radio frequency) layout person. Some one who's had some experience at very high frequency analog design layout (e.g. VCO's, phase lock loops, mixers, modulators, demodulators, multipliers etc.) Very high frequency means for my project >50 GHz, but that may not be too common, so reasonably speaking something >10 GHz. They should be familiar with on chip transmission lines, proximity effects, equal length runs of lines, inductor layout, isolation techniques, etc. Skilled in: 1. Cadence Virtuoso Layout Editor including Diva and/or Assura DRC and LVS. 2. Synopsis Hercules HDRC and HLVS. 3. Working knowledge of AIX o
<jason.turner@magicorp.com>
Magic Corporation
8310 N.Cptl of Txs Hwy:
Austin Tx 78731

Phone: 888-832-4410

Fax: 512-342-7034
- Tuesday, November 08, 2005 at 15:48:36 (CST)

We have a need for an engineering consultant who has government proposal experience doing: 1- Work Breakdown Structures 2- Microsoft Project MS2003 GAntt/PERT diagrams 3- Integrated Logistics Support Plans We have an immediate need - Tom Parish ( 631 457 1128) is Proposal Manager - - we expect to need the person for 30 days - we may have other RFPs come in during this period and may need to continue the engagement or hire permanently - for now we need help on the proposal - can you help?
<kmiller@globecommsystems.com>
Globecomm Systems
45 Oser Ave:
Hauppauge NY 11788

Phone: 6314571102

- Thursday, August 25, 2005 at 10:34:41 (CDT)

Nader Beshara, B.S.E.E. 431 town line rd, commack, NY 11725 . 631-462-1622 Home 631-745-9348 Cell E-mail: beshara42@aol.com • Objectives To provide technical and engineering services to promote a company’s productivity, sales and profits. To provide sales services and sales engineering management. To provide the expertise of an Electrical Engineer to promote a company’s industrial competitiveness and enhance productivity and cost effectiveness • Experience 1997 – Present EVO. Merchant Services Inc Plainview, NY Technical Support Engineer • Trouble Shouting Electronics Systems • Encrypting pin pad programming • Solving customers problems 1995 - 1997 Beshara Engineering, Inc. Islandia, NY District Sales Manager • Increased sales from $0.50 million to $0.70 million. • Suggested new products
<nbeshara@goevo.com>
evo merchant services
51E BETHPAGE RD:
PLAINVIEW NY 11803

Phone: 516 479 9000

- Monday, August 22, 2005 at 16:55:23 (CDT)

I am looking for someone with experience working on PLCs to program a small project for me. EZIO is the manufacturer of the PLC I am using. I have the programming software. This is probably one day or so of work. Please give me a call. Tracey
<tracey@jhmodels.com>
JH&Co, Inc
21-21 41st Avenue:
Long Island City NY 11101

Phone: 718 391 0049

Fax: 718 391 0092
- Wednesday, August 17, 2005 at 14:46:20 (CDT)

We have 53 Tire Stores in New York from Columbia County down to and including Suffolk County. We have a problem with spikes, high voltage and are loosing the control boards and motor controller boards on our electronic tire equipment. Looking for a Consultant and testing company to analysis the problem and suggest solutions. Bert Schwarz
<bssh@aol.com>
Mavis Tire
43 Kensico Drive:
Mount Kisco NY 10549

Phone: 914-244-9111

Fax: 914-244-4391
- Tuesday, August 16, 2005 at 15:44:24 (CDT)

I am a member forwarding a description of a possible opportinity. I have been contacted by someone seeking a designer for what was described as an "automotive Bluetooth application". He was seeking someone to handle all aspects of the project (I.E. HW, SW, mechanical), but I imagine he would be receptive to assembling a team. Please contact me if you have both experience and interest in this area. Thanks, Larry
<larryr@4innovation.biz>
IDS
1044 Washington Dr.:
Centerport ny 11721

Phone: 631427112

- Monday, August 15, 2005 at 20:43:16 (CDT)

Nader Beshara, B.S.E.E. 431 town line rd, commack, NY 11725 . 631-462-1622 Home 631-745-9348 Cell E-mail: beshara42@aol.com • Objectives To provide technical and engineering services to promote a company’s productivity, sales and profits. To provide sales services and sales engineering management. To provide the expertise of an Electrical Engineer to promote a company’s industrial competitiveness and enhance productivity and cost effectiveness • Experience 1997 – Present EVO. Merchant Services Inc Plainview, NY Technical Support Engineer • Trouble Shouting Electronics Systems • Encrypting pin pad programming • Solving customers problems 1995 - 1997 Beshara Engineering, Inc. Islandia, NY District Sales Manager • Increased sales from $0.50 million to $0.70 million. • Suggested new products
<nbeshara@goevo.com>
evo merchant services
431 town line rd:
commack ny 11725

Phone: 1 631 462 1622

- Tuesday, August 02, 2005 at 08:10:31 (CDT)

This is full time employment. Director of Business Development marketing Ethernet access products to carriers in North America. The position is in NJ and requires some technical knowledge of Ethernet and telecom, but it is imperative that the candidate have experience calling on carriers and developing marketing programs for Ethernet access products.
<lquinn@execrecruiter.com>
AE Feldman Associates
Northern Blvd:
Great Neck NY 11791

Phone: 203-344-1200

- Saturday, June 11, 2005 at 12:29:51 (CDT)

2. Director of Systems Engineers for a telecom equipment company in New Jersey, selling equipment to carriers. The candidate should have an engineering background, and 6+ years experience managing a team of pre sales systems engineers, experience with Network Management Systems, Ethernet access equipment, WAN, TDM, Voice and Data integration, broadband, IP, Fiber Optics, ATM, Frame, and x.25. Bachelor's degree in Engineering, communications, or a related field. MBA is a plus. This is full time employment.
<lquinn@execrecruiter.com>
AE Feldman Associates
Northern Blvd:
Great Neck NY 11791

Phone: 203-344-1200

- Saturday, June 11, 2005 at 12:28:57 (CDT)

I am looking to find candidates for 3 different positions, all full time employment, with salary commensurate with experience, and relocation is available for particular cases: 1. Engineer with 3 years of experience working in electronics packaging, including semiconductor fabrication, materials and equipment who can leverage that experience to help business clients make sound decisions about applications, markets, technologies, products and acquisitions. The candidate should have experience in direct design and fabrication in several of the following areas: Silicon, CMOS, Gallium Arsenide, RF and power devices and assemblies, as well as the ability to consult with clients in the electronics industry. 2. Director of Systems Engineers for a telecom equipment company in New Jersey, selling equipment to carriers. The
<lquinn@execrecruiter.com>
AE Feldman Associates
Northern Blvd :
Great Neck NY 11791

Phone: 203-344-1200

- Saturday, June 11, 2005 at 12:25:43 (CDT)

I received a call on the 'hotline' last Friday from a fellow representing the "Long Island Collegiate Job Fair". Given the non-inevitability of most of us either hiring or seeking a first job, this may seem uninteresting. However, if any of you have clients who might be looking for a summer intern or entry-level employee, you might want to pass the information along. Contact points are: http://www.thelongislandjobfair.com John.Mccrudden@liu.edu Regards to all, -lr
<larryr@4innovation.biz>
.
.:
. . .

Phone: .

- Tuesday, May 17, 2005 at 20:50:52 (CDT)

Dear All, I have a project that requires someone with experience developing USB devices. It's a tool that will interface with computer software and that specializes in sending one type of signal. If you would be interested in the project and learning more, please email or call me. Thank You, Davin
<davin@changotoys.com>
Chango Toys
272 Water St.:
New York NY 10038

Phone: 212-400-7526

- Wednesday, April 27, 2005 at 09:45:55 (CDT)

Need help writing business plan
<josephlmullen@hotmail.com>
Li Moran International Inc.
26 Willow Ridge :
Smithtown NY 11787

Phone: 2123532713

- Monday, March 21, 2005 at 11:09:20 (CST)

We have power lines and a tower across from our location. We heard there are companies out there that test them to see what they are really giving off.
<joepiacentini@aol.com>
JP Management Group, Inc.
5 Alister Circle:
East Northport NY 11731

Phone: 516-220-6682

- Saturday, January 08, 2005 at 14:44:37 (CST)

Location: NY Design Engineer Requirements: BSEE (MSEE preferred) or equivalent and five plus years design experience. Strong experience in Verilog HDL design and a strong working knowledge of block and top level design techniques, block and top level verification techniques, testbench design, chip synthesis, and physical layout; experience with Synopsys DC Compiler, PrimeTime, Formality, Tetramax, NC Verilog and the Unix environment; experience with ASIC synthesis techniques, DFT and ATPG techniques, floorplanning, timing analysis, timing closure techniques, and clock tree insertion in sub-micron designs are required. Experience with designs at 0.18 micron technology and knowledge of USB, Flash Card Formats, embedded processor designs, PC architectures and FPGA methodologies are a plus. Unix scripting and tools such as Perl. Profici
<arockett@rjsassociates.com>
RJS Associates
10 Columbus Blvd.:
Hartford CT 06106

Phone: 860 278-5840

Fax: 860 522-8313
- Thursday, January 06, 2005 at 08:23:46 (CST)

Location: NY Design Engineer Requirements: BSEE (MSEE preferred) or equivalent and five plus years design experience. Strong experience in Verilog HDL design and a strong working knowledge of block and top level design techniques, block and top level verification techniques, testbench design, chip synthesis, and physical layout; experience with Synopsys DC Compiler, PrimeTime, Formality, Tetramax, NC Verilog and the Unix environment; experience with ASIC synthesis techniques, DFT and ATPG techniques, floorplanning, timing analysis, timing closure techniques, and clock tree insertion in sub-micron designs are required. Experience with designs at 0.18 micron technology and knowledge of USB, Flash Card Formats, embedded processor designs, PC architectures and FPGA methodologies are a plus. Unix scripting and tools such as Perl. Profici
<arockett@rjsassociates>
RJS Associates
10 Columbus Blvd.:
Hartford CT 06106

Phone: 860 278-5840

Fax: 860 522-8313
- Thursday, January 06, 2005 at 08:23:26 (CST)

Location: NY Design Engineer BSEE/CE and a minimum of 7-10 years product design based on ASIC methods. RTL design with Verilog. Experience in Synopsys Design Compiler, VCS and Prime Time, scan insertion; back-end timing closure methods; various simulator tools and methods; UNIX environment including PERL; 0.35, 0.25 or 0.18 technologies; and PC platform architectures and compatibility issues are required. Multiple successful projects using this design flow must have been completed. Desired experience includes working knowledge of Viewlogic tool set and mixed schematic / RTL design; design validation through FPGA; physical level (transistor level) design experiences a plus; and knowledge of PC architectures and busses used: PCI, PCI-Express, LPC will be beneficial. Proficiency in Windows-based PC software applications and excellent
<arockett@rjsassociates>
RJS Associates
10 Columbus Blvd.:
Hartford CT 06106

Phone: 860 278-5840

Fax: 860 522-8313
- Thursday, January 06, 2005 at 08:21:50 (CST)

Location: NY Design Automation Manager Requirements: BSEE or equivalent (MSEE preferred) with a minimum 10 years of direct experience with digital/mixed-signal CMOS IC design tools, flows, and methodologies and a minimum of 5 years experience in the supervision of professionals. Direct experience with Synopsys EDA software including Design Compiler, DFT Compiler, PrimeTime, Formality, Astro, Hercules, StarRCXT, Power Compiler, TetraMax; Cadence EDA software including Verilog-XL, NC-Sim, Incisive, Virtuoso, and Composer; Sequence Design EDA software including Power Theater; data management and revision control concepts and software; final tape-out sign-off and mask shop interface; and C++, Perl, and Skill programming are highly desirable. Responsibilities include development, deployment, and support of SMSC design automation methodolo
<arockett@rjsassociates>
RJS Associates
10 Columbus Blvd.:
Hartford CT 06106

Phone: 860 278-5840

Fax: 860 522-8313
- Thursday, January 06, 2005 at 08:20:17 (CST)

Location: NY Systems Architect Requirements: BSEE (MSEE preferred) or equivalent with 4+ years experience in embedded hardware systems design, ASIC development, SOC design, or design of networking communication products. This position requires in depth knowledge of communication standards including: TCP/IP, 802.3, 802.11, Bluetooth, GSM, CDMA, TDMA, USB, and IEEE-1394. Additionally, PCI, PC architecture, and digital video experience are desirable. Responsibilities include participation in the development of new IC architectures by preparing "Product Architecture Specifications" based on marketing/engineering requirements and the definition of effective architecture, logic and circuit design solutions. Duties include system definition, system architecture and implementation, participation in RTL design, architectural development of e
<arockett@rjsassociates.com>
RJS Associates
10 Columbus Blvd.:
Hartford CT 06106

Phone: 860 278-5840

Fax: 860 522-8313
- Thursday, January 06, 2005 at 08:15:58 (CST)

This is a test. It turns out that the previous Request that I forwarded to you was addressed only to me. Thanks to Brian Kain for alerting me. For the rest of you, I already know you didn't receive the original. I have changed the address in the forms processing software and I'm sending this note using the form to test if sending to the mailing list works. If it doesn't, we'll be back to plan B, where I'll have to insert the email address of the volunteer each month. It seems preferable that all members be notified so each has an equal chance at the job. ... BTW, I checked into ATT CallVantage. They claim you can keep you same phon
<jlatourr@optonline.net>
James T. LaTourrette
2 Candlewood Ct:
Huntington NY 11743-1827

Phone: 631-271-6763

- Thursday, December 16, 2004 at 13:26:30 (CST)

Looking for someone to evaluate and recomend renovations to our 3 and 10 meter OATS site used for FCC & CE testing. Require measurements for site attenuation to be made per ANSI 63.4 - 2003 requirements and diagnose problems if found. We have required calibrated signal generators, receivers, and antennas.
<tarcati@dtb.com>
Dayton T. Brown Inc.
1195 Church Streeet:
Bohemia NY 11716

Phone: 631-244-6207

Fax: 631-589-4046
- Thursday, December 16, 2004 at 07:41:20 (CST)

From: Jim LaTourrette <j.latourrette@ieee.org>
Subject: LICN: From the "Monthly Volunteer Input Form"
Hey, I gave up too soon. My previous message finally arrived, so it probably went out to you all. I.e., if you received a message with subject: "LICN: licn.org upgrade and message forms" (sent via the all members form) as well as one with subject "licn.org upgrade" that I emailed directly with the members list and this email, then both of the new entry forms are working. -- Jim LaTourrette
- Saturday, November 13, 2004 at 11:08:03 (CST)

From: LaTourrette <latour@rama.poly.edu>
Subject: LICN: Test13
Test13
- Saturday, November 13, 2004 at 01:20:08 (CST)

From: Jim LaTourrette <latour@rama.poly.edu>
Subject: LICN: Test3
Test3
- Friday, November 12, 2004 at 22:10:41 (CST)

I am in contact with a prospective client who is in need of someone with experience in setting up a software revision and release management system. The task will involve assessing client-specific requirements, designing and codifying relevant policies and procedures, selecting an appropriate revision management tool, and implementing the process. If you're interested, please contact me. As I will be on the road for the next several days, email would be best for now. Regards to all, Larry Rachman
Larry Rachman <larryr@4innovation.biz>
6314271112
Principal: Innovation Design and Solutions, Inc.
LICN member with possible opportunity Software Process Software, management, interpersonal - Wednesday, September 29, 2004 at 17:36:41 (CDT)

I'm at the beginning of a project that will require the development of a server application to prepare and deliver custom "data bundles" to a large number of individual client devices. We envision that this will run on a commercial web-hosting server farm and be controlled/monitored via a web interface. If your background includes demonstratable experience in this sort of enviroment, including design, programming, and implementation, please give me a call so we can discuss the specifics. Thanks, Larry Rachman
Larry Rachman <larryr@4innovation.biz>
631 427 1112
Innovation Design and Solutions, Inc.
LICN member seeks project assistance Server-side applications, ecommerce - Wednesday, September 22, 2004 at 12:37:54 (CDT)

How to develop a system for HR Development
John Sihotang <johsi@plasa.com>
+62-22-2014386
System Development: PT Telkom
Developing Application for Training Needs Analysis TNA on-line HR System Development - Wednesday, September 01, 2004 at 21:08:02 (CDT)

We are an engineering technology company, covering nine states in the northeast and we specialize in Pro/ENGINEER model-centric design environments. We are currently seeking a HYDRAULIC SYSTEMS DESIGN EXPERT for a Defense customer who is converting a high-speed mechanical device to hydraulic operation. This is a short-term assignment with the person acting as an onsite expert/consultant in hydraulics to other design engineers. 3 HTI is in NJ near Philadelphia. Pro/E knowledge is not required. If you or anyone you know may be interested in this assignment, please contact me ASAP. Thank you and regards, John D'Andrea 3 HTI, LLC
john dandrea <jdandrea@3hti.com>
856-988-6447
Engineer: 3 HTI
hydraulic systems design expert Mechanical see below - Monday, August 30, 2004 at 13:41:14 (CDT)

Proficiency with 3-D software, such as SolidWorks, for the design and documentation of products. Knowledge of plastic injection molding, in order to work with model makers. Experience in manufacturing. Familiarity with Far East manufacturers preferred. Compensation package will include salary range of $30-40 per hour and also a large bonus based on gross sales.
Aaron Cohen <yayatoys@aol.com>
516-767-0305
owner: YA-YA Toys
Mechanical/industrial engineer - Monday, August 30, 2004 at 13:19:48 (CDT)

Just took a call on the telephone referral line, as follows: Jack Parker, of Internation Data Search (a contract house - not he principal) at 888-832-4410 is seeking an RF designer familiar with Agilent ADS. The project is a 6-12 month gig for an ultrawideband microwave application, and is located "outside of NYC". Anyone interested should contact Jack directly. -Larry
Larry Rachman <larryr@4innovation.biz>
From Telephone Referral System RF Designer Agilent ADS - Friday, August 27, 2004 at 08:16:19 (CDT)

This inquiry is probably not applicable to your organization, but if it is, fine. If not, perhaps you could recommend companies who specialize in custom-built assembly machines. The application is for the assembly of parts used in medical syringes. Thank you.
Richard Mintz <rpmintz@yahoo.com>
Tel: 5164480342 Fax: 5167415031
President: Ameco Corporation
Design of Assembly Machine ME,EE,Computer,etc - Tuesday, August 24, 2004 at 20:58:37 (CDT)

I have a prospective client who is interested in developing a BREW application to run on Qualcomm cell phones. Anyone with knowledge/experience in this area, please give me a call. Regards, -lr
Larry Rachman <larryr@4innovation.biz>
631-427-1112
Principal: Innovation Design and Solutions, Inc
Internal Referral - Seeking BREW consultant ME,EE,Computer,etc - Sunday, June 20, 2004 at 10:26:11 (CDT)

I have upgraded this form so the "Bad Data" dead-end without explanation no longer appears. Instead, an explanation will be offered and a chance to correct errors without having to re-enter valid data. I have also changed the address so that the email generated by this form will go to the referrals mailing list. So I have used the form to send this notice to all full members.
Jim LaTourrette <j.latourrette@ieee.org>
631-271-6763
Webmaster IEEE Consultants Network of LI dba LICN
Update on the Request for LICN Consulting Service form Web Development Perl, CGI, HTML - Sunday, June 20, 2004 at 01:23:23 (CDT)

Project is creation of a Windows device driver for a Fiber channel communications board. If you are interested, and have done this sort of thing before, please contact me by email or phone. - LR
Larry Rachman <larryr@4innovation.biz>
631-427-1112
(LICN member)
Need software engineer - Windows device driver Win32 Device Driver - Thursday, May 20, 2004 at 07:35:14 (CDT)

Request
Jim2 <jlatourr@optonline.net>
123-456-7890
Pres Assoc
My Subject Mech design mechanical design - Wednesday, March 10, 2004 at 11:47:00 (CST)

We have a prototype of a metal chair that needs modification.
Gary Lichtenstein <swaytest@aol.com>
917-957-1324 phone. 718-774-5390 fax
Pres. Extensionchair Inc.
Product Design Engineer redesign Metal chair - Friday, March 05, 2004 at 11:21:22 (CST)

We have a prototype of a metal chair that needs modification.
Gary Lichtenstein <swaytest@aol.com>
917-957-1324/718-774-5390 fax
Pres. Product Design Engineer redesign Metal chair - Friday, March 05, 2004 at 11:19:48 (CST)

We have a prototype of a metal chair that needs modification.
Gary Lichtenstein <swaytest@aol.com>
017-957-1324/718-774-5390 fax
Pres. Product Design Engineer redesign Metal chair - Friday, March 05, 2004 at 11:19:16 (CST)

Web page maintainance
Jim LaT <jlatourr@optonline.net>
Computer Perl, CGI, HTML - Wednesday, January 21, 2004 at 20:37:00 (CST)